Contents
Microsoft Teams is the Northwestern University collaboration platform. Teams Voice is a cloud-based phone service that allows employees to make and receive traditional Northwestern telephone calls directly from the Microsoft Teams Calls app for iPhone.
Launch the Microsoft Teams Software
Launch the Microsoft Teams App.
- At the login window, enter the following details:
- Username: E-mail address
- Password: NetID Password

- Upon an initial login, you will be prompted to share your location. Tap Allow all
- If you want your Northwestern telephone to ring on your Teams iPhone app, Tap Allow when prompted to Send You Notifications.

Microsoft Home Screen
Upon your successful migration to Teams Voice, the Calls feature will be available in your Teams navigation menu. Tap More>Calls to see the screen where you can make or receive calls to and from your Northwestern-based telephone number.

Select Reorder to move Calls up on the navigation menu for easier access.

Calls - Voice
When enabled, employees may make and receive phone calls in the Teams App for access to features such as hold and transfer.

You may also set up and access speed dials, view call history and listen to voicemail messages.

Speed dials
- Add and access speed dials
- Create a group name for a speed dial list
Recent (Call History)
- View your call history- call or chat back
Voicemail
- Voicemail will show in the calling app with audio playback and transcript
Emergency address
- Teams uses your location so that first responders can reach you in the case of an emergency. While on the Northwestern campus network either wired or wireless, your location will be automatically updated. When working remotely, you are responsible for entering your accurate location address.
When working remotely, you are responsible for entering your location’s address. If you do not enter an address in your MS Teams location and dial 911, you will reach the Emergency Response Center, and they will require you to verbally provide an address before forwarding your call to the appropriate PSAP (Public Safety Answering Point). If you fail to enter the correct address and dial 911, the PSAP will dispatch first responders to the address which is identified in your MS Teams location. Enter your address when working remotely by following these steps:
- To view your current location, tap your Initials>Settings>Calling>Emergency location.

- Ensure that you share Location access with Teams in your local phone settings. Settings>Apps>Teams>Location.
- Select While Using the App

You may place a call on behalf of your personal line by using the Call icon.
Enter 9+1+10-digit number in the Microsoft Teams Calls Dialpad. You may also dial by using the last 5-digit of any university telephone number for internal calls or Search for a colleague using the People tab. 
Audio Call
Once on an active audio call your Call Controls will display on screen.
Audio features:
- iPhone Audio – choose the audio option

Note: if your caller has their camera enabled, your screen will appear as a meeting. Additional features including hold and transfer may be accessed using the More menu.
More Call Handling Options
- Show Live Captions
- Language and speech
- Put call on Hold
- Transfer

When receiving a direct incoming call for your Northwestern telephone number, you will be prompted in the upper section of your screen. The call notification will contain the caller ID. You will see the options to Accept (Blue) or Decline (Red).

Note: Tap Decline to send the caller immediately to voicemail.
Tap More>Show live captions to enable a transcript of the active conversation.

Place a Call on Hold
- Choose the Hold icon.

- When your call is placed on hold, you see the hold indicator.

- Tap Resume to reconnect your call.

Answering a second call
While connected to an active call, it is possible to receive a second incoming call.
- Tap Accept and Hold icon to place the current call on and connect to the new caller.

- This will create 2 call windows.

- Tap the Notifications drop-down to view held calls.
- Tap the Resume/Play icon to toggle between calls.
Note: create an impromptu conference by selecting More>Merge with...

There are 2 types of transfers. Transfer now will transfer the call immediately while Consult first Transfer will allow you to consult privately before you send the call.
Blind Transfer
- During an active call, tap the Transfer icon.

- Select which will place your call on hold and open a transfer window.

- Search for a contact you want to transfer the call to or enter the number.

- When the caller answers, the transfer will be complete automatically.
Consult then Transfer
- During an active call, tap Transfer icon.

- Choose the Consult First icon. This will place your call on hold and open a consult a transfer window.

- Enter the number or search by name for the person you would like to consult with.
- Select the Name and/or Number (Announce the call).
- Tap the Notifications drop-down.
- Tap the Transfer icon.o complete the transfer.
- Tap Transfer to confirm.

Calls may be parked to easily be retrieved from another Northwestern Voice device.
- During an audio call, tap More>Park Call.
- When your call is Parked, the caller will hear hold music.
- A Park window will display the Park confirmation and provide you with the Code.
- You may tap Copy code

Retrieve a Parked Call
You may retrieve a Parked call from any Northwestern Voice device.
- Tap the Parked calls icon.
- Enter or paste the Park Code.
- Tap Pick up.

Note: There is a 2-minute reversion timer for unanswered Parked calls. The call will ring back to you and if unanswered, the caller will be redirected to your voicemail.
Messages will display in the MS Teams Voice app.
- Tap the Calls menu.
- Tap the Voicemail icon to see your new and saved messages.

- Each message will contain audio playback options and a transcript.

Voicemail Set-Up
- Tap the Initials icon in the upper left corner.
- Tap Settings>Calling
- Scroll to Voicemail
- Tap Change voicemail greeting. Teams will place a call into the Voicemail system
- Press 1 to Record a greeting.

Settings
Tap your Initials icon in the upper left corner and select Settings.

- Settings>Notifications
- Ensure Calls Notifications are enabled which will allow you to hear your Teams Voice ring and see calls presented.

Settings>Calling>Contacts
- Find all of your Contacts on Teams by syncing your device contacts.

- Settings>Calling>Incoming Calls- choose how you want to handle incoming calls:
- Call forwarding
- If unanswered

- Ringtones-choose a ringtone for incoming calls.

Speed Dial
You may add speed dial numbers for internal or external contacts. To add a speed dial, follow these steps:
- Tap the Add to Speed Dial icon in the speed dial window.

- Search for an internal colleague or Enter the phone number.

- Tap Add.
- Label the Speed Dial.
- Tap Add.

Note: You may allow Teams to access your personal contacts on your iPhone. Tap the option to Allow Teams to access your contacts.

Your feedback on this article is welcome, and we review comments regularly. However, if you have an issue or question requiring immediate attention or want to discuss your feedback on this article, please get in touch with the Northwestern IT Service Desk at 847-49
1-4357 (1-HELP) or
consultant@northwestern.edu.